There is no doubt one of the most reputed trading platforms in the world nowadays is Binance.
Therefore, the first thing you should to do if you need to start operating on it is to figure out how to get Veltor (VLT).
Before entering the wonderful world of crypto within the Binance platform, you need to know the following.
There’s only way to get started in operating on Binance: opening an account in it.
Simply follow each of the instructions below.
Search for the "Register" button in the Binance homepage and click on it to start the registration process.
Click here to go straight to the Binance platform.
Locate the "Register with a phone or email" button in the homepage and press it.
Apple mobile phones or tablets can be used as well.
In this article, we’ll will show you how to suscribe with an e-mail.
Binance will immediately send a one-time-only activation keycode (remember: this is NOT your password) that you’ll write it in the corresponding line, then click on "Send"
That’s it! You are now registered to Binance.
Take a time to become familiar with the different options of the Binance platform by browsing them.
You’ll immediately notice how simple is to begin trading Veltor (VLT).
The ID checking is a required step you must complete to have access to all those options.
Warning: No Veltor (VLT) trading will be allowed if you overlook this protection measure.
In the following paragraphs, you’ll be guided about how to do that. Zero problems.
These are the instructions to verify your Binance subscription and get the authorization to begin trading:
From the user profile menu, select "Security"
You may also press "Verify" button at the top of the screen
In the list shown on the left-hand side of the navigator window, press on the "Identification" option.
Country of residence is the first thing you must choose.
You’ll will find three levels of verification:
Begin by choosing "Start now" located below the "Verified" level.
A pop-up window will appear, and there you’re going to enter your personal information: Nationality, first name and last name, second name and date of birth. Also, make sure you type the exact address of your residence
Next, you’ll have to to provide a legal document to verify your identity.
passport, ID card or even a license will be enough to complete this requirement.
Follow the system instructions to take a selfie.
After you have completed the platform’s requirements, you’ll have to wait a moment while your account is confirmed.
All you need to do is be patient, Binance is going to send you an email when your profile has been accepted.
Congrats! Now you’re officially enabled to operate with Veltor (VLT). The following instructions will be helpful.
In this segment you’ll see how easy is to invest your money in Veltor (VLT).
The next step is to support your identity using a legal document.
You can do this by using your passport, ID card, or driver’s license.
In the next step, you will have to take a selfie, according to the application’s instructions.
The last step is on Binance’s side: a verification process that will take only a short time.
Now you must wait until your profile has been approved. Be patient, the platform will send you an email.
The following instructions will guide you through the Veltor (VLT) trading process. As soon as you’ve received the confirmation email, you’re a Binance authorized Veltor (VLT) trader.
In this segment you’ll discover how simple is to invest your money in Veltor (VLT).
Some processes might have optional paths
Use the "Buy cryptos" menu on the Binance homepage to find out which alternatives are available to you when buying.
You will need to, of course, do this once you are logged into your account
Hovering your mouse pointer over this button will show a list of alternatives for making your purchase.
At this point, the Binance platform will require you to show a legal document for identity verification.
You can do this with your passport, ID card, or driver’s license.
Follow the system instructions to take a selfie.
After fulfilling all those steps, the Binance system will execute a confirmation process on your account.
As soon as your profile has been approved, you’ll be notified via email, just be patient.
Congratulations! Now you’re officially licensed to buy Veltor (VLT). The following instructions will be helpful.
The first step is to know how to make a purchase of Veltor (VLT).
Be aware that you have more than one option for this process
To find out which options are available to you when making a purchase, browse through the "Buy cryptos" menu on the Binance homepage.
Needless to say you must log into your account to be able to do this
See all the different purchase options just by hovering your mouse over this button.
Choose the credit card-related option from the "Buy Cryptos" drop-down list.
Next, just adhere to these instructions:
Currency preferred and amount of the investment should be specified here.
The the Veltor (VLT) you wish to purchase must be indicated in the second field
Taking into account the amount of USD you’ve just specified, the platform will automatically display the quantity of Veltor (VLT) you’ll get.
Continue reading for detailed guidelines:
In the next box, select the currency you wish to buy with and type how much you want to invest.
In the second field you should pick the Veltor (VLT) you’d like to get
After you do so, the platform will automatically display the number of Veltor (VLT) you are going to receive, according the amount of USD you’ve just invested.
Next click "Continue".
In case you’re going to pay with a credit card, go to the "Visa/Mastercard" box and click on the "Add card" option.
Indicate your credit card data and press "Next".
The credit card’s associated address must be specified next. Try not to err a single character, since you must type it exactly as it is, otherwise the card could not be approved. Then choose "Add card".
Click "Continue" after you notice your card has been successfully added to your user profile as a new payment method.
The system will now display the summary of the order you are generating. The sum your card will be charged with the currency you have chosen, and the Veltor (VLT) you will get.
It will also indicate the commission will be charged for the transaction.
Now you have to certify the order pressing the "Confirm" button during the following minute, or it will be automatically shut down.
The following step has to be carried out on the credit card banking webpage. Follow the instructions in the same way you would normally generate a payment with your credit card.
You may check your Binance e-wallet (referred to as the «Spot Wallet») once the banking process has been done to see your recently purchased Veltor (VLT) already credited
The system will now display the details of the order you are about to complete. The sum your card will be charged with the currency you’ve chosen, and the Veltor (VLT) you will receive.
Another detail of relevance in this quick view is the amount you’ll be charged as a commision for making the operation.
Within the next 60 seconds click on "Confirm", and then the order will expire automatically.
The next step must be carried out on the credit card banking platform. Follow the guidelines in the same way you would pay with your credit card.
Once the banking procedure is complete, you are already in possession of the recently purchased Veltor (VLT) in your Binance digital wallet (referred to as the «Spot Wallet»)
Now that the new payment method has been added to your profile, go to the top bar of the navigator and hover on "Buy Crypto" to drop-down the list of options and select "Trading P2P". Then see the following guidelines:
After you have made a payment to the seller, they will release the Veltor (VLT), just by confirming payment reception.
This way, they will quickly be deposited into your wallet.
However, in case you would want to purchase another Veltor (VLT), you will have to move them to your Spot Wallet.
That’s easy: just click on "Transfer to Spot Wallet" right after the buying order is completed.
In the event you didn’t follow this step, don’t fear, you can move the cryptos at any other time.
When you have made a payment to the trader, they will release the Veltor (VLT), by confirming payment reception.
The place where Veltor (VLT) are added to is your account wallet.
Note that you will need to send them to your Spot Wallet in case you want to purchase another crypto.
To get this done, all you have to do is click on "Transfer to Spot Wallet" immediately after the buying order is completed.
Should you forget to follow this step right after the purchase, there’s nothing to worry about: you’ll be able to do it later.
With these funds already in your Spot Wallet, nothing keeps you from purchasing any crypto you think might be profitable.
Purchase any cryptocurrency from the Binance platform just following the instructions detailed next:
With these funds already in your Spot Wallet, nothing keeps you from trading any cryptocurrency you think might be worthwhile.
Discover how easy is to buy any crypto from the Binance platform:
Depending on the above mentioned information, you are now ready to start trading on Binance.
Don’t wait any more and start generating an extra income.
If you wish to earn money by purchasing cryptocurrencies, you should learn how to utilize Kucoin platform. This form ofexchange is yielding great benefits to any or all its subscribers, and it is making increasingly more evolution in all its operations.
If you would like to learn conveniently how to purchase a Veltor (VLT) in Kucoin, you need to stay in this article.
When you’ve subscribed to Kucoin and met the safety requirements, you need to deposit your cash. Using this method is fairly easy, the best part is that you have several alternatives to do that.
One of them should be to go to the "Assets" or "Balance" section at the top right of the display and select the «Deposit» link. Next, select the Veltor (VLT) you want to deposit into your personal account to buy new cryptos, for example, USDT.
Following this, you should pick the network you will use for completing the operation. We strongly advise Tron (TRC20) because it gets the lowest commissions.
Next is the the address you need to write in the «Exchange» where you currently have the USDT you want to transfer to Kucoin. When you do this, you’ll receive the funds in the main account immediately.
If that does not work in your country, you can try moving the money to your account through P2P trading. This kind of purchase means that you make a conventional bank transfer to any of the listed traders to get any of the certified cryptos.
Once you received the funds in your account, it’s time for you to learn how to use the Kucoin platform.
Before buying a Veltor (VLT) on Kucoin you must transfer the money you have just purchased to the trading accounts. To do this you need to click on the "Balance" menu, click on the main account, enter the cryptocurrencies and after that choose "Transfer". This last button can be situated on the same line than the currency you will use for the purchase.
If this doesn’t work in the country you’re living, you could attempt transferring funds to your account via P2P trading. This type of deal implies that you make a bank transfer to one of the authorized traders to obtain any of the authorized cryptos.
When you received the money in your account, it’s the perfect time to learn how to work with the Kucoin website.
Before buying a Veltor (VLT) on Kucoin you must move the money you’ve just purchased to the trading account. To achieve this you must open the «Balance» menu, click on the main account, enter your cryptocurrencies and after that choose «Transfer». This last option can be found on the same line as the currency you’ll use for the purchase.
After this, you are directed to a window to select where you are going to send the funds. You must transfer from the "Main Account" to the «Trading Account», and indicate the currency and the sum you decided to send to transact. Then click on «Confirm».
Once you got the money already credited in the account, you can buy your crypto and begin trading.
Now you will learn how to buy Veltor (VLT) in different ways. To start, you have to access the «Trade» menu and click on "Spot trading" (Spot Market). Then simply type the word Veltor (VLT) in the search line in the top corner of the web page.
The platform will reveal the crypto pairs you can operate with.
In short, you‘ll only be capable to buy Veltor (VLT) just with the crypto pairs displayed there.
Just for this case, you’re allowed do it with «USDT», «USDC», «KCS», and «BTC».
We choose ADA/USDT since we have funds in this pair. When we do this, it instantly loads the crypto chart and the order book with all the buy and sell businesses.
In order to be able to make the transaction, you ought to type the trading password.
At the bottom-right, the platform displays us the financial markets to trade crypto, instantly enabling «Spot». There we now have 3 ways to buy Veltor (VLT). The options are as follows:
You can also configure the order activation yet process it at the best market price. You can do this by selecting "Stop Market", and indicating in «Stop Price» the sum you wish the Veltor (VLT) to get to trigger the order and the amount of USDT to pay. By hitting Buy Veltor (VLT), your buying order will be processed at the market rate when it is the same as the stop price you have determined.
With just one of these three options, you already have the Veltor (VLT) tokens you’ve just purchased in your trading account. From now on you can operate with that or you may want to buy any other cryptos. Bear in mind that with Veltor (VLT) you’ll only be able to get the cryptos available in their pairs. Usually, you will have to sell the Veltor (VLT) for a crypto that is typically available in the Veltor (VLT) pairs, such as BTC, USDT, and BNB, and after that you can buy the one that you actually wish.
Now you can start trading a Veltor (VLT) via the Kucoin site.
| Exchange | Market Pairs | Buy |
|---|---|---|
| YoBit | NMC/BTC | - |
