UniLayer LAYER Rank #1303
Contracts
Binance is one of the top trading platforms in the world.
But if you’d like to begin trading on it, the first thing you must do is to figure out how to get UniLayer (LAYER).
That’s why on this page we will give you all the information you need to buy UniLayer (LAYER) on the Binance crypto platform.
There is only way to begin operating within the Binance platform: subscribing to it.
Hassle-free registration: just follow the detailed instructions below.
Visit the Binance homepage and click on the "Register" key.
You can log in directly by pressing here.
At this moment press the "Register with a phone or email" button.
This can also be done with any iOS tablet.
For the purpose of this article, the e-mail address registration process will be shown.
You should have received an email in the address you’ve just used to create your Binance account. It will have an activation password you will enter in the corresponding box. Then click on "Send"
That’s all! You are now registered to Binance.
You’ll see it’s simple to navigate the Binance platform and review all the options it offers.
That’s the best way to know how practical the Binance platform is, and how fast you can begin trading UniLayer (LAYER).
The ID verification is a required step you need to complete to gain access to all these options.
It is very important to notice that until you complete this safety step, you’ll not be able to start trading UniLayer (LAYER).
No big deal, though. Continue reading through the next paragraphs to complete that step.
The following are the instructions to verify your Binance account and get authorized to begin trading:
Click on "Security" from the drop-down list under the user profile area
Or simply look for the "Verify" button on the top of the navigator window
Pick "Identification" on the left options list.
Pick the Country of Residence.
It will show you 3 levels of verification: the one you already have, the Verified, and the Verified Plus.
To begin, choose "Start now" located by the "Verified" level.
At this point, some personal information is required:
At this point, the Binance platform will ask you to use a legal document for identity corroboration.
Use your passport, ID card or even your driver’s license to complete this step.
Follow the system guidelines to take a selfie.
Now you’ll have to wait for a short period while an account verification process is performed.
Now you have to wait until your request has been accepted. Be patient, the system is going to send you an e-mail.
Congrats! Once you’ve received the confirmation you’re officially enabled to buy UniLayer (LAYER). See the guidelines that follow.
In this section you’ll realize how simple is to invest your money in UniLayer (LAYER).
At this point, the Binance platform will ask you to provide a legal document for identity checking.
Use your passport, ID card or even your driver’s license to complete this step.
Follow the system guidance to take a selfie.
The final step is on Binance’s side: a corroboration process that will take only a short time.
When your request has been approved, you will be informed via e-mail, just be patient.
After that, it’s time to acquire UniLayer (LAYER), to do so follow the guidelines below.
In this segment you’ll discover how easy is to make a purchase of UniLayer (LAYER).
Take into account that you may find different alternatives for this process
To find out which alternatives can be found when making a purchase, look for the "Buy cryptos" menu on the Binance main page.
Obviously, you’ll only be able to do this once you are logged in
Move your mouse on this option and a list of buying alternatives will be shown.
Next, you’ll need to present a legal document to verify your identity.
You can do this by using your ID card, passport, or driver’s license.
Follow the system requirements to take a selfie.
Now you’ll have to wait for a short time while an account confirmation process is performed.
So, be patient, Binance is going to send you an email once your profile has been accepted.
Congrats! Once you’ve received the confirmation you’re officially licensed to operate with UniLayer (LAYER). See the guidelines that follow.
Learning how to convert cash into UniLayer (LAYER) is actually quite easy.
Be aware that you have more than one option for this process
Browse through the "Buy cryptos" menu on the Binance homepage to find out which alternatives you have when buying.
Needless to say you must sign in to your account to do this
Unveil all the different buying options just by hovering your mouse over this button.
Choose the credit card-related option from the "Buy Cryptos" drop-down menu.
Next, just stick to the following guidelines:
Currency to be used and how much to invest must be indicated in the next box.
In the next field you should pick the UniLayer (LAYER) you intend to get
Once you do so, the system will immediately display the number of UniLayer (LAYER) you are going to receive, considering the amount of USD you have recently stated.
After that, just observe the following guidelines:
In the next box, select the currency you want to use and specify the amount you are going to invest.
Next, choose the UniLayer (LAYER) you are going to buy
Once you do so, the system will immediately display the quantity of UniLayer (LAYER) you will receive, according the amount of USD you have previously specified.
Press "Continue".
Now you must indicate your method of payment. To pay with a credit card, choose in the "Visa/Mastercard" box the option "Add card".
Type your credit card data and click "Next".
The credit card’s associated address must be stated next. Be very careful, since you’ll need to write it exactly as it is, otherwise your card might not be accepted. Then select "Add card".
With this, your credit card will be added to the valid methods of payment in your account. Click "Continue".
The platform will now display the synthesis of the buying order you are about to complete. The sum you are paying in the currency you’ve picked, and the UniLayer (LAYER) you will receive.
Another important detail in this overview is the percentage Binance will charge you as a commision for making the operation.
At this point you have 1 minute to click on "Confirm", otherwise the order will automatically expire.
The Binance platform will now send you to the credit card issuing bank. Proceed exactly as you usually do when making a standard online credit card payment.
Your recently purchased UniLayer (LAYER) will be available in your Binance digital wallet (referred to as the «Spot Wallet») as soon as the banking process is complete
The next screen will display a snapshot of the operation in its final stage. That includes the sum you will pay, the selected currency and the amount of UniLayer (LAYER) bought.
In fact, Binance will take a certain percentage as a commission for supporting the operation, and that will appear in that quick view as well.
Now you have to acknowledge the order clicking on the "Confirm" button during the next 60 seconds, or it will be automatically canceled.
The following step has to be done on the credit card banking webpage. Proceed exactly as you usually do when making a payment using your card on the bank website.
You may check your Binance digital wallet (referred to as the «Spot Wallet») after the banking procedure is complete to see your recently bought UniLayer (LAYER) already there
After the new method of payment has been added to your profile, locate the "Buy Crypto" menu in the top part of the screen, press on the "Trading P2P" option and follow the instructions described below:
The seller, upon validating money reception, will immediately release the UniLayer (LAYER).
You may see your wallet account balance to confirm reception.
Nonetheless, you will have to transfer them to your Spot Wallet in case you would want to purchase any other crypto.
You can move them immediately once the purchase order is completed just by clicking "Transfer to Spot Wallet".
This UniLayer (LAYER) internal transfer can be performed anytime later.
The seller, upon confirming payment reception, will instantly release the UniLayer (LAYER).
The place where UniLayer (LAYER) are deposited is your Binance wallet.
Take into account that your UniLayer (LAYER) must be in your Spot Wallet in case you would want to buy others, so you need to send them there before.
To do this, all you have to do is click on "Transfer to Spot Wallet" immediately after the buying order is completed.
If you forget to do this right after buying the cryptos, there’s nothing to worry about: you’ll always be able to do it later.
All right! Now you have funds available to trade any of the numerous UniLayer (LAYER) in the Binance platform.
Buy any crypto from the Binance platform just following the instructions described below:
Perfect! Now you have funds available to trade any of the several UniLayer (LAYER) in the Binance platform.
Buy any crypto from the Binance platform just following the instructions described below:
This post have surely pictured you a wide overview of what Binance is and how you can trade UniLayer (LAYER) on it.
So, no need to think twice, make a profitable business within the Binance platform.
In case you like to earn money by buying cryptocurrencies, you must discover how to use the Kucoin platform. This form oftrade is getting good benefits for all its subscribers, in fact it is making a lot more evolution in all its tradings.
If you wish to learn conveniently how to purchase a UniLayer (LAYER) in Kucoin, you must keep on reading this post.
When you’ve created your account into the Kucoin platform and fulfilled the security requirements, you have to deposit your cash. This method is quite simple, good news is that you have several alternatives to accomplish that.
One of them should be to enter to the "Assets" or "Balance" section at the top right from the display and select the "Deposit" button. After that, select the UniLayer (LAYER) you would like to put into your account to buy new cryptos, for instance, USDT.
After this, you will find the network you will utilize for the operation. We strongly suggest Tron (TRC20) because it has the lowest commissions.
Below is the the address you must put in the «Exchange» where you have the USDT you want to transfer to Kucoin. When you do this, you’ll get the funds in your main account in a matter of seconds.
If that is not working in your country, you could try transferring the money to your account through P2P trading. This type of deal means that you actually make a conventional bank transfer to any of the authorized traders to obtain any of the approved cryptos.
Once you obtained the money in your account, it’s time for you to learn how to interact with the Kucoin platform.
Before buying a UniLayer (LAYER) on Kucoin you have to transfer the money you have just purchased to the trading account. To accomplish this you have to click on the «Balance» menu, click the main account, enter your cryptocurrencies and after that choose "Transfer". This last option can be found on the same line as the currency you will use to complete the purchase.
If that seems not to be not working in the country you’re currently living, you can try transferring the money to your account via P2P trading. This kind of deal means that you make a bank transfer to any of the documented traders to obtain any of the approved cryptos.
Now that you received the money in your account, it’s time for you to start using the Kucoin platform.
Purchasing a UniLayer (LAYER) on Kucoin you need to send the money you have just purchased to the trading accounts. To get this done you must go to the «Balance» menu, click on the main account, enter your cryptocurrencies then choose "Transfer". This last button can be situated on the same line as the currency you are about to use for the purchase.
Next, you are directed to a window to pick where you want to send the funds. You need to take from the "Main Account" to the "Trading Account", and indicate the currency and the amount you decided to send to trade. Then simply click «Confirm».
Once you got the funds already credited within your account, you are set to buy your crypto and begin trading.
Next we will discuss how to buy UniLayer (LAYER) in diverse ways. To begin, you need to go to the «Trade» menu and pick «Spot trading» (Spot Market). After that enter the term UniLayer (LAYER) in the search box at the top corner of the page.
The system will show you the crypto pairs you are able to operate with.
In short, you‘ll only be capable of purchase UniLayer (LAYER) just with the crypto pairs showed there.
Just for this case, you can do it with «USDT», «USDC», «KCS», and «BTC».
We choose ADA/USDT since we’ve got funds in this two. When we do so, it immediately loads the crypto information and the order book with all the buy and sell operations.
In order to be able to do the transaction, you ought to type the corresponding code.
At the bottom-right, the platform shows the user the financial markets to trade crypto, automatically enabling the «Spot». There are 3 options to buy UniLayer (LAYER). Those are the following:
You can also set the order activation yet process it at the greatest market price. You do this by choosing "Stop Market", and entering in «Stop Price» the sum you want the UniLayer (LAYER) to reach to trigger the order and the amount of USDT to spend. By clicking on Buy UniLayer (LAYER), your order will be executed at the market rate once it is the same as the stop price you’ve just put.
With just one of these three options, you’ve already got the UniLayer (LAYER) tokens you have bought available in your trading account. From this moment you may operate with this or you can get other cryptos. Remember that with UniLayer (LAYER) you will only be able to get the cryptos available in their pairs. Frequently you will need to trade your UniLayer (LAYER) for a crypto that is commonly available in the UniLayer (LAYER) pairs, such as BTC, USDT, and BNB, and then you can buy the one that you actually wish.
Now you can buy a UniLayer (LAYER) at the Kucoin site.