SoldierNodes SLD Rank #3355
Contracts
Projects
There is no doubt one of the world’s most innovative trading platforms nowadays is Binance.
Understanding how to purchase SoldierNodes (SLD) is vital if you need to get started operating on that platform.
This post will try to teach the reader about how to purchase SoldierNodes (SLD) on the Binance SoldierNodes (SLD) platform.
There’s only way to begin operating on Binance: opening an account in it.
To do so, you need to follow each of the steps listed below.
Visit the Binance homepage and press on the "Register" option.
You may log in directly by clicking here.
Now click on the "Register with a phone or email" button.
iOS tablets or mobile phones can be used to do this as well.
Here we’ll will describe the subscription technique using an e-mail address.
Check the inbox in the email address you indicate at registration and look for the activation code for your account. Write it in the corresponding line and click on "Send"
Finally, your Binance subscription has been activated.
You’ll see it’s simple to enter the Binance platform and observe all the options it offers.
That’s the best way to understand how practical the Binance platform is, and how fast you can start trading SoldierNodes (SLD).
Fulfill the mandatory identity checking to enable all those options.
Warning: No SoldierNodes (SLD) trading will be permitted if you skip this security step.
No big deal, though. Read the following paragraphs to complete that step.
These are the instructions to verify your Binance subscription and get authorized to start trading:
From the user profile menu, pick "Security"
You may also click on the "Verify" button at the top of the screen
Look for the option "Identification" on the left side of the screen.
Here you’ll have to select your country of residence.
The platform shows you 3 levels of verification: the one you already have, the Verified, and the Verified Plus.
To begin, click on "Start now" just below the "Verified" level.
In this step, the subscriber is asked to enter some personal information:
Here, the Binance platform will require you to use a legal document for identity checking.
passport, ID card or even a license will be enough to fulfill this formality.
Now the system will require you to take a selfie under certain conditions.
Now you will have to wait for a short time while an account confirmation process is performed.
Now you must wait until your request has been approved. Be patient, Binance is going to let you know via email.
The following instructions will guide you through the SoldierNodes (SLD) purchasing process. As soon as you’ve received the confirmation e-mail, you’ve become a Binance authorized SoldierNodes (SLD) trader.
In this segment you’ll discover how easy is to make a purchase of SoldierNodes (SLD).
Next, you’ll have to to show a legal document to check your identity.
Use your ID card, passport or even your driver’s license to complete this step.
Follow the system requirements to take a selfie.
Now you will have to wait for a short time while an account verification process takes place.
As soon as your profile has been approved, Binance is going to send you an email, just be patient.
Upon receiving that email it’s time to purchase SoldierNodes (SLD), to do so see the instructions below.
The first step is to discover how to invest your money in SoldierNodes (SLD).
Take into account that you could have more than one option for this process
To find out which alternatives can be found when making a purchase, see the "Buy cryptos" menu on the Binance main page.
Needless to say you must be logged into your account to do this
Hovering your mouse pointer over this option will display a list of alternatives for making your purchase.
At this point, the Binance platform will require you to provide a legal document for identity verification.
You can do this with your ID card, passport, or license.
Follow the system guidelines to take a selfie.
Now you will have to wait for a short period while an account confirmation process is performed.
Now you must wait until your profile has been approved. Be patient, Binance is going to send you an email.
The following instructions will guide you through the SoldierNodes (SLD) purchasing process. As soon as you’ve got the confirmation e-mail, you’re a Binance licensed SoldierNodes (SLD) trader.
Learning how to invest your money in SoldierNodes (SLD) is not so difficult.
Some processes might have alternative paths
To know which options you have when buying, see the "Buy cryptos" menu on the Binance homepage.
Obviously, you’ll only be able to do this once you are logged in
Placing your mouse pointer over this option will display a list of alternatives for making the purchase.
What you must do to purchase the SoldierNodes (SLD) of your preference using a credit card, should be to choose this method from the "Buy Cryptos" drop-down list.
Keep on reading for detailed guidelines:
Currency to be used and amount of the investment should be indicated here.
The the SoldierNodes (SLD) you would like to buy must be picked from the second field
Depending on the amount of USD you’ve recently stated, the platform will automatically display the number of SoldierNodes (SLD) you are going to receive.
Next, just stick to these instructions:
Currency preferred and amount of the investment should be specified in the next box.
In the next field you must pick the SoldierNodes (SLD) you wish to get
The quantity of SoldierNodes (SLD) you are going to be given will depend upon the amount of USD you’ve previously invested. The Binance system will immediately display it.
Click on "Continue".
In case you are going to pay with your credit card, go to the "Visa/Mastercard" box and click on the "Add card" option.
Indicate your card data and press "Next".
Now specify the physical address details for the CC. After this, select "Add card".
With this step, your card will be added to the payment methods in your account. Click "Continue".
Next, all the relevant details of the operation will be presented: the amount you’ll pay and the corresponding currency, and obviously, the cryptos you are going to receive.
Another important detail in this snapshot is the amount you’ll be charged as a commision for making the operation.
In less than 1 minute press "Confirm", from then on the order will expire automatically.
The system will now send you to the bank issuing the credit card. Follow the directions in the same way you would normally generate a payment with your credit card.
Your recently bought SoldierNodes (SLD) will be credited to your Binance digital wallet (called the «Spot Wallet») when the banking process has been completed
Next, all the important details of the operation will be displayed: the sum you’ll pay and the corresponding currency, and obviously, the cryptos you are going to receive.
Another important detail in this snapshot is the sum Binance will charge you as a commision for making the transaction.
At this point you have 60 seconds to click on "Confirm", otherwise the order will be automatically aborted.
After this, you’ll be redirected to the bank platform the credit card belongs to. Proceed exactly as you do when making a normal online credit card payment.
Your recently purchased SoldierNodes (SLD) will be deposited to your Binance e-wallet (referred to as the «Spot Wallet») when the banking process is complete
Once you have added the new payment method to your profile, go to the "Buy Crypto" menu (upper bar of the navigator), find the "Trading P2P" option, and follow the guidance below:
When you have completed a payment to the seller, they may release the SoldierNodes (SLD), just by confirming receipt of the payment.
This way, they will quickly be added to your account balance.
But in order for you to purchase another SoldierNodes (SLD), you will need to send them to your Spot Wallet.
To achieve this, all you have to do is press "Transfer to Spot Wallet" right after the purchase order has been completed.
In case you didn’t follow this step, don’t fear, you can do it at any other time.
Cryptos will be released by the trader as soon as money reception acknowledge has been done.
The place where SoldierNodes (SLD) are added to is your Binance wallet.
However, in order for you to purchase any other SoldierNodes (SLD), you need to move them to your Spot Wallet.
That’s quite simple: just press "Transfer to Spot Wallet" right after the buying order is completed.
In case you didn’t do this, don’t be anxious, you can do it at any other time.
With these funds already in your Spot Wallet, don’t fear to purchase any crypto you think will be worthwhile.
To purchase SoldierNodes (SLD) from the Binance platform what you just have to do is described below:
That’s all! This way you will have funds in the Spot Wallet so you will be able to trade any of the huge selection of SoldierNodes (SLD) that the Binance platform has.
Purchase any crypto from Binance just following the steps detailed next:
This article have surely pictured you a detailed overview of what Binance is and how you can trade SoldierNodes (SLD) on it.
Don’t wait any more and start earning an extra income.
In case you are planning to make money via cryptocurrencies, you would have to discover how to use the Kucoin platform. This exchange is yielding good benefits for all its subscribers, and it is showing increasingly more evolution in all its tradings.
If you wish to learn conveniently how to purchase a SoldierNodes (SLD) in Kucoin, you will need to keep on reading this post.
After you’ve subscribed to Kucoin and complied the security requirements, you should deposit your currency. This method is quite simple, and there are several options to do so.
One of them is usually to enter to the «Assets» or «Balance» section at the top right of the screen and choose the "Deposit" link. Next, pick the SoldierNodes (SLD) you would like to put into your account to buy new cryptos, for instance, USDT.
After that, you will need to find the network you will use to get the transaction done. We all suggest Tron (TRC20) for it gets the lowest commissions.
Next you’ll find the address you must put in the "Exchange" where you currently have the USDT you wish to convert to Kucoin. When you have already done this, you can expect to instantly receive the funds in the main account.
If that does not work in the country you’re living, you can attempt transferring funds to your account via P2P trading. This type of deal implies that you actually make a conventional bank transfer to one of the listed traders to receive any of the approved cryptos.
Now that you get the money in your account, it’s the perfect time to start using the Kucoin website.
Before buying a SoldierNodes (SLD) on Kucoin you have to transfer the money you have just purchased to the trading accounts. To do this you need to navigate to the «Balance» menu, click the main account, enter your cryptocurrencies and after that choose "Transfer". This last button can be located on the same line than the currency you’ll use for the purchase.
If that doesn’t work in the country you’re currently living, you could attempt transferring funds to your account through P2P trading. This kind of purchase signifies that you make a standard bank transfer to one of the registered traders to receive any of the official cryptos.
Once you obtained the money in your account, it’s time for you to learn how to work with the Kucoin platform.
Purchasing a SoldierNodes (SLD) on Kucoin you have to send the money you have just purchased to the trading accounts. To do this you have to open the «Balance» menu, click on the main account, enter the cryptocurrencies then choose «Transfer». This last button can be located on the same line than the currency you’ll use to complete the purchase.
After this, you will be sent to a window to choose where you wish to send the funds. You will need to transfer from the "Main Account" to the «Trading Account», and indicate the currency and the quantity you decided to send to operate. Then select "Confirm".
Now that you have the funds within your account, you are able to purchase your crypto and begin trading.
Next we will describe how to purchase SoldierNodes (SLD) in diverse techniques. To begin, you have to open the «Trade» menu and select «Spot trading» (Spot Market). Then simply type the word SoldierNodes (SLD) in the search line at the top corner of the web page.
The platform will indicate the crypto pairs you can operate with.
In short, you‘ll only be able to buy SoldierNodes (SLD) only with the crypto pairs displayed there.
Just for this case, you can do it with «USDT», «USDC», «KCS», and «BTC».
We choose ADA/USDT as we’ve got funds in this pair. When we do it, it automatically loads the crypto graph and the order book containing the buy and sell businesses.
For being able to accomplish the transaction, you will have to enter the trading key.
At the bottom-right, it displays us the financial markets to trade crypto, enabling automatically the «Spot». There we have 3 ways to purchase SoldierNodes (SLD). The options are as follows:
You can also configure the order activation and process it at the greatest market price. You do this by selecting "Stop Market", and entering in «Stop Price» the amount you want the SoldierNodes (SLD) to arrive to activate the order and the amount of USDT to invest. By simply clicking Buy SoldierNodes (SLD), your order will be processed at the market rate once it is the same as the stop price you’ve just put.
With any of these options, you already have the SoldierNodes (SLD) tokens you have bought available in your trading account. From now on you can operate with that or you may want to purchase other cryptos. Remember that with SoldierNodes (SLD) you’ll only be authorized to get the cryptos available in their pairs. Probably you will have to trade your SoldierNodes (SLD) for a crypto that is typically available in the SoldierNodes (SLD) pairs, such as BTC, USDT, and BNB, and after that you could purchase the one you really wish.
Now you can buy a SoldierNodes (SLD) through Kucoin.