You can find many trading platforms on the Internet nowadays, but undoubtedly Binance is one of the most popular and innovative.
Therefore, the first thing you must to do if you’d like to begin operating on it is to discover how to buy SEER (SEER).
Stay on this article and you will see all the information you need for purchasing crypto on Binance.
Opening a Binance account is the initial step you need to do.
Subscribing on the Binance platform is quite simple: observe the following instructions.
See a Binance homepage and press on the "Register" button.
You have the direct link here.
In the Binance main page you’ll find a button named "Register with a phone or email". Press it.
You can also do this using your iOS tablet.
In this guide, we’ll will explain how to suscribe with an e-mail.
By now, you surely have received an email sent to the address you’ve just used for creating your Binance account. It will have an activation password you will enter in that page. Then press "Send"
Finally, your Binance account is active.
It would be a good idea to navigate through the different areas of the Binance platform and get acquainted to them.
That’s the best way to understand how friendly the Binance platform is, and how fast you can begin operating with SEER (SEER).
The ID checking is a mandatory step you need to fulfill to gain access to all these options.
It is very important to note that unless you complete this safety measure, you’ll not obtain permission to start operating with SEER (SEER).
In the following instructions, you’ll be guided on how to do it. Zero problems.
See the next instructions and become a certified subscriber:
Choose "Security" from the drop-down list under the user profile section
Another alternative is to go to the top of the screen and press the "Verify" button
Click "Identification" on the left list of options.
Here you should choose your country of residence.
The platform will display you 3 levels of verification: the one you already have, the Verified, and the Verified Plus.
To begin, click on "Start now" just by the "Verified" level.
A new window will be shown, and there you’re going to give your personal data: Nationality, first name and surname, middle name and birth date. Besides, make sure you enter the exact address of your residence
The next step is to sustain your identity with a legal document.
passport, ID card or even a license will be enough to fulfill this requirement.
Follow the system guidance to take a selfie.
After fulfilling all those requirements, the Binance platform will execute a verification process on your account.
Now wait patiently, Binance will let you know via e-mail when your application has been accepted.
The following instructions will guide you through the SEER (SEER) buying process. As soon as you’ve got the confirmation email, you’re a Binance licensed SEER (SEER) trader.
In this section you’ll learn how simple is to make a purchase of SEER (SEER).
It is time to sustain your identity with a legal document.
ID card, passport or even a driver’s license will be enough to fulfill this condition.
Follow the system instructions to take a selfie.
Now you’ll have to wait for a short period while an account confirmation process takes place.
Now wait patiently, Binance will send you an e-mail when your application has been accepted.
The following instructions will guide you through the SEER (SEER) buying process. As soon as you’ve received the confirmation email, you’ve become a Binance authorized SEER (SEER) trader.
The first thing is to figure out how to convert money into SEER (SEER).
Some processes might have optional paths
Use the "Buy cryptos" menu on the Binance homepage to know which options are available to you when making a purchase.
Obviously, you’ll only be able to do this if you’re logged in
Place your mouse over this button and a list of buying alternatives will be displayed.
It is time to support your identity with a legal document.
ID card, passport or even a license are all valid documents to complete this condition.
Now, you will have to take a selfie, following the application’s instructions.
The last step will be made by the Binance system: a corroboration process that will take only a short time.
Now you have to wait until your application has been approved. Be patient, the platform is going to let you know via e-mail.
After that, it’s time to buy SEER (SEER), just follow the instructions below.
Understanding how to convert money into SEER (SEER) is actually quite easy.
Some steps may have alternative paths
The "Buy cryptos" menu on the Binance homepage should be your reference at buying time.
Certainly, you’ll only be able to do this if you’re logged in
Move your mouse on this key and a list of buying alternatives will be displayed.
Go to the "Buy Cryptos" and pick the credit card-related option from the menu.
Read on for further directions:
Currency to be used and how much to invest should be indicated here.
In the next field you should select the SEER (SEER) you wish to buy
Once you do so, the platform will immediately display the number of SEER (SEER) you’ll get, according the amount of USD you’ve just defined.
Next, just follow the following instructions:
Now you should select the currency you want to buy with and specify how much you want to invest.
The the SEER (SEER) you would like to purchase must be selected from the second field
Taking into account the amount of USD you’ve recently specified, the system will immediately show you the number of SEER (SEER) you’ll be given.
Click "Continue".
To add your CC as a payment method, choose in the "Visa/Mastercard" box the option "Add card".
Enter your credit card details and press "Next".
Your credit card’s associated address should be specified next. Be very careful, since you must write it exactly as it is, otherwise your card could not be approved. Then select "Add card".
With this step, your card will be added to the payment methods in your user profile. Click "Continue".
Next, all the important details of the operation will be summarized: the amount you will pay and the corresponding currency, and obviously, the cryptos you are going to get.
Certainly, Binance will charge you a small amount as a commission for supporting the transaction, and it will be shown in that snapshot also.
In less than 1 minute press "Confirm", and then the order will expire automatically.
The next step has to be done on the credit card bank webpage. Then you will complete a standard on-line payment using your credit card.
You can check your Binance digital wallet (called the «Spot Wallet») once the banking procedure has been finished and you’ll find your recently bought SEER (SEER) already credited
The platform will now display the details of the buying order you are about to complete. The amount you are paying in the currency you have picked, and the SEER (SEER) you will be given.
Indeed, Binance will charge you a certain percentage as a commission for supporting the purchase, and that will be shown in that snapshot as well.
Now you have to validate the order pressing the "Confirm" button during the following 60 seconds, or it will be automatically canceled.
Next, you will be redirected towards the banking platform the credit card has been issued by. There you will complete a standard on-line payment using your credit card.
When the banking process is complete, you are already in possession of the recently bought SEER (SEER) in your Binance e-wallet (referred to as the «Spot Wallet»)
Now that the new method of payment has been added to your profile, go to the top part of the display and pass over "Buy Crypto" to drop-down the menu and click on "Trading P2P". Then see the following steps:
Cryptocurrencies will be released by the trader as soon as payment reception validation has been done.
The place where SEER (SEER) are transferred to is your account wallet.
Although, in order for you to get any other SEER (SEER), you need to move them to your Spot Wallet.
You can move them immediately once the buying order has been completed just by clicking "Transfer to Spot Wallet".
If you forget to follow this step right after buying the cryptos, no problem at all: you’ll be able to do it at any moment.
Once you have completed a payment to the seller, they will release the SEER (SEER), just by confirming payment reception.
You may check your wallet account balance to confirm reception.
Take into account that your SEER (SEER) must be in your Spot Wallet in order for you to buy others, so you need to send them there before.
That’s quite simple: just press "Transfer to Spot Wallet" once the purchase order is completed.
If you didn’t follow this step, don’t stress, you can do it at any other time.
With these funds already in your Spot Wallet, nothing keeps you from trading any crypto you consider will yield the highest profit.
To buy SEER (SEER) from Binance what you just have to do is the following:
With these funds already in your Spot Wallet, nothing keeps you from buying any cryptocurrency you think will be worthwhile.
Buy any crypto from the Binance platform just following the instructions detailed next:
You’ve already learned how simple is to start trading SEER (SEER) on Binance.
Cryptos have come to stay, and Binance is a safe and comfortable place to do business. Begin right now!
In case you are planning to make money by buying cryptocurrencies, you would have to discover ways to use the Kucoin platform. This form oftrade is delivering good benefits to all its subscribers, and it is making more and more progress in all its operations.
If you need to learn quickly how to buy a SEER (SEER) in Kucoin, you have to stay in this post.
After you have subscribed to Kucoin and complied the security requirements, you must deposit your dollars. The process is very simple, good news is that there are several ways to accomplish that.
One of them is usually to enter to the «Balance» or «Assets» section at the top right on the navigator screen and select the "Deposit" link. Next, pick the SEER (SEER) you would want to put into your account to buy new cryptos, for instance, USDT.
Next, you will have to pick the network you will use for the transaction. We all suggest Tron (TRC20) for it retains the lowest commissions.
Next you’ll find the address you must insert in the "Exchange" where you have the USDT you’d like to transfer to Kucoin. When you have already done this, you will receive the funds in the main account immediately.
If this doesn’t work in your country, you can try moving funds to your account through P2P trading. This type of purchase implies that you actually make a standard bank transfer to any of the registered traders to obtain any of the authorized cryptos.
Once you obtained the money in your account, it’s time for you to learn how to navigate through the Kucoin platform.
Purchasing a SEER (SEER) on Kucoin you must transfer the money you’ve just purchased to the trading accounts. To accomplish this you have to click on the "Balance" menu, click the main account, enter your cryptocurrencies and choose «Transfer». This last option can be found on the same line than the currency you will use to complete the purchase.
If that doesn’t work in the country you’re currently living, you should attempt moving funds to your account via P2P trading. This type of purchase signifies that you make a bank transfer to any of the listed traders to obtain any of the official cryptos.
Now that you received the money in your account, it’s the perfect time to learn how to navigate through the Kucoin platform.
Purchasing a SEER (SEER) on Kucoin you need to move the money you have just purchased to the trading accounts. To do this you have to navigate to the "Balance" menu, click the main account, enter the cryptocurrencies and then choose «Transfer». This last button can be located on the same line as the currency you will use to complete the purchase.
Next, you will be directed to a window to select where you are going to send the funds. You need to take from the "Main Account" to the "Trading Account", and indicate the currency and the sum you wish to send to operate. Then visit «Confirm».
Now that you got the funds already credited in the account, you can purchase your crypto and start trading.
Next we will describe how to purchase SEER (SEER) in different ways. To start, you must open the «Trade» menu and pick «Spot trading» (Spot Market). Then enter the term SEER (SEER) in the search line at the top corner of the site.
The system will show you the crypto pairs you can operate with.
In short, you will only be capable of buy SEER (SEER) just with the crypto pairs it shows you.
In this case, you can do it with «USDT», «USDC», «KCS», and «BTC».
We select ADA/USDT because we’ve got funds in this couple. When we accomplish that, it immediately loads the crypto chart and the order book with all the buy and sell procedures.
For being able to accomplish the transaction, you ought to type the corresponding password.
At the bottom-right, the markets to trade crypto can be seen, immediately enabling the «Spot». There are 3 options to buy SEER (SEER). The options are as follows:
You can also configure the order activation and process it at the optimum market price. You will do this by choosing «Stop Market», and typing in «Stop Price» the value you desire the SEER (SEER) to get to trigger the order and the amount of USDT to pay. By simply clicking Buy SEER (SEER), your purchase will be processed at the market rate when it is the just like the stop price you’ve just determined.
With just one of these three options, you already have the SEER (SEER) tokens you’ve just purchased in your trading account. From now on you may trade with that or you can get other cryptos. Bear in mind that with SEER (SEER) you will only be capable of get the cryptos available in their pairs. Generally you will need to sell your SEER (SEER) for a crypto that is usually available in the SEER (SEER) pairs, such as BTC, USDT, and BNB, and you can purchase the particular one that you actually want.
Now you can buy a SEER (SEER) using the Kucoin site.
| Exchange | Market Pairs | Buy |
|---|
