No doubt one of the top trading platforms in the world nowadays is Binance.
So, if you need to start trading on it, the first thing you need to do is to discover ways to buy OneLedger (OLT).
This post is intended to guide you about how to buy OneLedger (OLT) on the Binance OneLedger (OLT) platform.
Opening a Binance account is the very first step you must complete.
Easy registration: just follow the guidelines listed below.
See a Binance main page and click on the "Register" key.
Go directly to Binance by pressing here.
In the Binance main page you’ll see a button named "Register with a phone or email". Press it.
This can also be done with any iOS tablet.
In this guide, we’ll will describe how to do this using an email address.
See the inbox of the e-mail address you indicate at registration and search the activation code for your Binance account. Enter it in the corresponding line and click on "Send"
You’re now a Binance user!.
You can now navigate the Binance platform and review all the options it has to offer.
You’ll discover how simple is to begin trading OneLedger (OLT).
To get access to those options, you must fulfill the identity checking.
Please, note that it will be only after you have completed this safety step that you’ll be allowed to begin trading OneLedger (OLT).
No big deal, though. Continue reading through the following paragraphs to fulfill that step.
These are the instructions to verify your Binance subscription and get the authorization to begin trading:
Pick "Security" from the drop-down list under the user profile section
You may also click the "Verify" button at the top of the navigator window
In the list shown on the left-hand area of the screen, click on the "Identification" option.
Now you should pick your country of residence.
The platform will show you three verification levels: the one you already have, the Verified, and the Verified Plus.
To begin, press "Start now" located under the "Verified" level.
Then it displays a pop-up window in which you must provide the following data:
Now you’ll need to use a legal document to support your identity.
passport, ID card or even a license will be enough to fulfill this requirement.
In the next stage, you will be asked to take a selfie, following the application’s requirements.
After fulfilling all those requisites, the Binance platform will carry out a confirmation process on your account.
Now wait patiently, Binance will let you know via e-mail once your application has been approved.
After that, it’s time to buy OneLedger (OLT), to do so follow the guidelines below.
First you need to figure out how to make a purchase of OneLedger (OLT).
It is time to check your identity with a legal document.
passport, ID card or even a driver’s license are all valid documents to fulfill this formality.
In the next step, you will be asked to take a selfie, following the platform’s guidelines.
The last step is on Binance’s side: a confirmation process that will just take a while.
Once your profile has been accepted, you’ll be informed via email, just be patient.
After that, it’s time to purchase OneLedger (OLT), just follow the instructions below.
Learning how to buy a OneLedger (OLT) is not so difficult.
You will probably have different alternatives throughout the process
See the "Buy cryptos" menu on the Binance main page to know which alternatives can be found when buying.
Needless to say you must log into your account to be able to do this
Placing your mouse pointer over this key will show a list of alternatives for making the purchase.
The next step is to sustain your identity using a legal document.
passport, ID card or even a license will be enough to complete this requirement.
Now the platform will ask you to take a selfie under certain conditions.
After fulfilling all those requirements, the Binance system will execute a confirmation process on your account.
Once your request has been approved, the platform will send you an email, just be patient.
Upon receiving that e-mail it’s time to get OneLedger (OLT), just follow the instructions below.
In this segment you’ll discover how easy is to make a purchase of OneLedger (OLT).
You may find different alternatives throughout the process
To find out which options are available to you when making a purchase, browse through the "Buy cryptos" menu on the Binance homepage.
Needless to say you must be logged into your account to do this
Place your mouse over this option and a list of buying alternatives will deploy.
What you must do to buy the OneLedger (OLT) you want using a credit card, is to select this option from the drop-down menu labeled "Buy Cryptos".
Next, just observe these directions:
Currency preferred and amount of the investment should be stated in the next box.
The the OneLedger (OLT) you would like to purchase should be indicated in the second field
When you do so, the system will immediately show you the quantity of OneLedger (OLT) you will be given, taking into account the amount of USD you’ve previously indicated.
After that, just carry out these directions:
In the next box, pick the currency you wish to use and type how much you are going to invest.
In the next field you must choose the OneLedger (OLT) you would like to buy
The number of OneLedger (OLT) you will get will depend upon the amount of USD you have just specified. The Binance system will immediately show it to you.
Now select "Continue".
To include your Visa/MC credit card as a payment method, select in the "Visa/Mastercard" box the option "Add card".
CC details must be entered in this step, then press "Next".
Your credit card’s address must be indicated next. Try not to miss a single character, since you must type it exactly as it is, otherwise the card might not be admitted. Then choose "Add card".
Click "Continue" after you check your card has been successfully included in your user profile as a new method of payment.
The system will now show you the synthesis of the purchase order you are generating. The amount you are paying with the currency you’ve selected, and the OneLedger (OLT) you will be credited.
Indeed, Binance will charge you a small amount as a commission for supporting the purchase, and that will appear in that overview as well.
You have 1 minute to click on "Confirm", otherwise the order will automatically expire.
After this, you will be sent to the site of the bank issuing the credit card. Proceed exactly as you usually do when making a standard online credit card payment.
Your recently bought OneLedger (OLT) will be available in your Binance e-wallet (referred to as the «Spot Wallet») once the banking procedure is complete
Next, all the relevant details of the transaction will be summarized: the amount to be charged on your credit card and the corresponding currency, and obviously, the cryptos you are going to receive.
Another important detail in this quick view is the amount Binance will charge you as a commision for making the transaction.
Now you have to certify the order clicking on the "Confirm" button during the following 60 seconds, or it will be automatically shut down.
The following step has to be done on the credit card bank webpage. Proceed exactly as you do when making a payment with your card on the bank website.
Once the banking procedure is complete, you are already in possession of the purchased OneLedger (OLT) in your Binance e-wallet (called the «Spot Wallet»)
Now that the new method of payment has been added to your profile, go to the upper bar of the navigator and hover on "Buy Crypto" to drop-down the list of options and click on "Trading P2P". Then see the following instructions:
The trader, upon confirming money reception, will immediately release the OneLedger (OLT).
This way, they will instantly be added to your wallet balance.
However, in order for you to get another OneLedger (OLT), you must send them to your Spot Wallet.
That’s quite simple: just press "Transfer to Spot Wallet" once the buying order is completed.
If you didn’t do this, don’t stress, you can do it later.
Once you have made a payment to the seller, they may release the OneLedger (OLT), by confirming payment reception.
You may verify your wallet account balance to confirm reception.
Take into account that your OneLedger (OLT) must be in your Spot Wallet in order for you to buy others, so you need to move them there before.
That’s quite simple: just press "Transfer to Spot Wallet" immediately after the buying order has been completed.
In case you didn’t follow this step, don’t be anxious, you can do it at any other moment.
Perfect! Now you have money available to trade any of the huge selection of OneLedger (OLT) in the Binance platform.
To purchase OneLedger (OLT) from Binance what you just have to do is the following:
All right! Now you have funds available to trade any of the numerous OneLedger (OLT) in the Binance platform.
See how easy is to purchase any cryptocurrency from Binance:
Depending on the above mentioned information, you are now ready to start trading on Binance.
So, no time to waste, make a worthwhile business in the Binance platform.
In case you wish to earn money by buying cryptocurrencies, you should be able to utilize Kucoin platform. This form ofexchange is getting good benefits to all its subscribers, and it is making a lot more progress in all its tradings.
If you would like to learn quickly how to purchase a OneLedger (OLT) in Kucoin, you need to keep on reading this article.
Once you have subscribed to Kucoin and complied the security requirements, you need to deposit your money. This procedure is pretty easy, the best part is that you have several alternatives to do that.
One of them is usually to enter to the "Balance" or "Assets" section at the top right in the screen and select the «Deposit» link. Next, pick the OneLedger (OLT) you want to put into your personal account to buy new cryptos, for instance, USDT.
Next, you should select the network you will utilize to get the operation done. We usually advise Tron (TRC20) since it retains the lowest commissions.
Below is the the address you should put in the «Exchange» where you currently have the USDT you want to send to Kucoin. When you do this, you are going to obtain the funds in the main account immediately.
If this is not working in your country, you can try transferring funds to your account via P2P trading. This kind of purchase implies that you make a conventional bank transfer to one of the listed traders to get any of the official cryptos.
Once you obtained the money in your account, it’s time to learn how to use the Kucoin platform.
Purchasing a OneLedger (OLT) on Kucoin you need to send the money you have just purchased to the trading account. To do this you must open the "Balance" menu, click the main account, enter the cryptocurrencies after which choose «Transfer». This last button can be situated on the same line than the currency you’ll use for the purchase.
If that does not work in your country, you should try transferring the money to your account through P2P trading. This kind of transaction implies that you actually make a bank transfer to one of the listed traders to obtain any of the approved cryptos.
Now that you have the funds in your account, it’s time for you to start using the Kucoin website.
Purchasing a OneLedger (OLT) on Kucoin you have to transfer the money you’ve just purchased to the trading accounts. To get this done you have to open the "Balance" menu, click the main account, enter your cryptocurrencies after which choose «Transfer». This last option can be located on the same line than the currency you will use for the purchase.
Next, you will be directed to a menu to pick where you are going to send the funds. You will need to transfer from the «Main Account» to the «Trading Account», and add the currency and the sum you want to send to trade. Then click on "Confirm".
Once you got the money within your account, you can purchase your crypto and start trading.
Now you will see how to buy OneLedger (OLT) in diverse techniques. To start, you should go to the «Trade» menu and select "Spot trading" (Spot Market). Next enter the acronym OneLedger (OLT) in the search line at the top corner of the page.
The platform will show you the crypto pairs you are able to trade with.
In short, you will only be allowed to buy OneLedger (OLT) just with the crypto pairs showed there.
With this case, you’re allowed do it with «USDT», «USDC», «KCS», and «BTC».
We select ADA/USDT because we have funds in this set. When we do this, it instantly loads the crypto chart and the order book with all the buy and sell tradings.
For being able to complete the operation, it is necessary to enter the trading code.
At the bottom-right, the markets to trade crypto can be found, enabling immediately «Spot». There you’ll find 3 options to purchase OneLedger (OLT). Next you’ll see the options:
You can also set the order activation and process it at the greatest market price. You are going to do this by choosing "Stop Market", and indicating in «Stop Price» the amount you desire the OneLedger (OLT) to get to trigger the order and the amount of USDT to invest. By clicking on Buy OneLedger (OLT), your purchase will be processed at the market rate when it is the identical to the stop price you have previously determined.
With just one of these three options, you’ve already got the OneLedger (OLT) tokens you’ve just bought available in your trading account. From now on you’re free to make transactions with it or you can buy other cryptos. Bear in mind that with OneLedger (OLT) you will only be authorized to get the cryptos available in their pairs. Usually, you will need to trade your OneLedger (OLT) for a crypto that is typically available in the OneLedger (OLT) pairs, such as BTC, USDT, and BNB, and you can get the one that you really expect.
Now you can buy a OneLedger (OLT) at the Kucoin site.
| Exchange | Market Pairs | Buy |
|---|
