JoinCoin JOIN Rank #5944
You can find many trading platforms today on the Internet, but without a doubt Binance is one of the most popular and reputed.
Understanding how to purchase JoinCoin (JOIN) is essential if you wish to start out operating on that platform.
So, in this post we will give you all the information you should have to purchase JoinCoin (JOIN) on the Binance cryptocurrency exchange.
Subscribing to the Binance platform is the initial step you need to do.
Registering onto the platform is easy: check the following instructions.
On the Binance homepage you have to locate the "Register" button and click on it.
Here you have the direct access to Binance.
Look for the "Register with a phone or email" button in the main page and click on it.
This can also be done with any iOS device.
In this guide, we’ll will show you how to do this using an e-mail account.
You surely have received an email sent to the address you’ve just used for creating your Binance account. It will have a one-time-only activation password you’ll have to will enter in that page. Then click on "Send"
That’s all! You are now subscribed to Binance.
It is a nice idea to visit the different areas of the Binance platform and get acquainted to them.
You’ll immediately notice how simple is to begin operating with JoinCoin (JOIN).
Complete the mandatory identity verification to enable all those options.
It is very important to note that until you fulfill this security measure, you’ll not be authorized to start trading JoinCoin (JOIN).
No big deal, though. See the next instructions to complete that step.
See the following instructions and become an authorized subscriber:
Choose "Security" from the drop-down list under the user profile section
You may also press "Verify" button on the upper part of the navigator window
Pick "Identification" on the left options list.
Country of residence is the first thing you must choose.
You’ll will find three levels of verification:
Begin by selecting "Start now" just near the "Verified" level.
Then it shows a pop-up window in which you should tytpe the following data:
Here, the Binance platform will ask you to use a legal document for identity corroboration.
Use your passport, ID card or even your driver’s license to complete this step.
Now the system will require you to take a selfie following certain guidelines.
After completing all those requirements, the Binance system will carry out a confirmation process on your account.
Now you have to wait until your request has been accepted. Be patient, the system is going to send you an email.
Upon receiving that e-mail it’s time to get JoinCoin (JOIN), just follow the guidelines below.
The first thing is to learn how to invest your money in JoinCoin (JOIN).
Now you’ll have to to present a legal document to sustain your identity.
You can do this by using your passport, ID card, or license.
Follow the system guidance to take a selfie.
After you have fulfilled the platform’s instructions, you’ll have to wait a while for the verification to be applied to your account.
When your request has been accepted, Binance is going to send you an email, just be patient.
Congratulations! Now you’re officially enabled to trade JoinCoin (JOIN). The following instructions will be helpful.
The first step is to learn how to invest your money in JoinCoin (JOIN).
You may have more than one option throughout the process
To know which alternatives can be found when making a purchase, look for the "Buy cryptos" menu on the Binance main page.
Needless to say you must log into your account to be able to do this
Place your mouse over this key and a list of buying alternatives will be shown.
It is time to check your identity using a legal document.
ID card, passport or even a driver’s license are all valid documents to complete this formality.
Follow the system requirements to take a selfie.
The final step will be carried out by the Binance system: a corroboration process that will just take a while.
Now wait patiently, Binance will let you know via email once your profile has been accepted.
The following instructions will guide you through the JoinCoin (JOIN) purchasing process. As soon as you’ve got the confirmation email, you’re a Binance licensed JoinCoin (JOIN) trader.
The first thing is to discover how to buy a JoinCoin (JOIN).
Some processes may have alternative paths
The "Buy cryptos" menu on the Binance main page should be your reference when making a purchase.
Needless to say you must be logged into your account to do this
Placing your mouse pointer over this option will show a list of alternatives to make your purchase.
Go to the "Buy Cryptos" and select the credit card-related option from the menu.
Read on for further instructions:
Currency preferred and amount of the investment should be defined here.
Next, select the JoinCoin (JOIN) you are going to get
The quantity of JoinCoin (JOIN) you’ll be given will depend upon the amount of USD you’ve previously indicated. The Binance platform will immediately show it to you.
Next, just follow these instructions:
Currency to be used and how much to invest must be specified in the next box.
The the JoinCoin (JOIN) you wish to buy must be indicated in the second field
The quantity of JoinCoin (JOIN) you’ll get will depend upon the amount of USD you’ve recently defined. The Binance platform will automatically display it.
Click on "Continue".
Now you must specify the method of payment you’ll use. To pay with your credit card, choose in the "Visa/Mastercard" box the option "Add card".
Then the system will prompt you to indicate your credit card numbers.
In this step you must indicate the address associated to the card. Type it exactly as it is, then press "Add card".
Now that your card has been successfully included, click on "Continue".
Next, you’ll see a quick view of the operation about to be completed. It includes the sum you are paying, the chosen currency and the quantity of JoinCoin (JOIN) purchased.
Obviously, Binance will charge you a certain percentage as a commission for supporting the purchase, and that will be shown in that summary also.
In less than 1 minute click on "Confirm", from then on the order will expire automatically.
The next step must be done on the credit card banking platform. Proceed just as you usually do when making a payment with your credit card on the bank website.
Your recently purchased JoinCoin (JOIN) will be available in your Binance digital wallet (referred to as the «Spot Wallet») once the banking process has been done
Next, you’ll be presented a quick view of the operation about to be completed. That includes the sum your card will be charged, the chosen currency and the amount of JoinCoin (JOIN) bought.
It will also let you know the commission will be charged for the transaction.
In less than 1 minute click on "Confirm", from then on the order will expire automatically.
The system will now send you to the bank issuing the credit card. Then you should make a normal online payment using your credit card.
When the banking procedure is complete, you’ll have your purchased JoinCoin (JOIN) in your Binance e-wallet (referred to as the «Spot Wallet»)
After you have added the new method of payment to your account, move to the "Buy Crypto" menu (upper bar of the navigator), find the "Trading P2P" button, and follow the guidance below:
When you have completed a payment to the trader, they will release the JoinCoin (JOIN), by confirming payment reception.
The place where JoinCoin (JOIN) are added to is your Binance wallet.
Nonetheless, you need to transfer them to your Spot Wallet in case you would want to get another cryptocurrency.
That’s quite simple: just press "Transfer to Spot Wallet" right after the purchase order has been completed.
If you forget to do this right after the purchase, there’s nothing to worry about: you’ll always be able to do it later.
Cryptos will be released by the seller as soon as money reception validation has been done.
The default place where JoinCoin (JOIN) are added to is your Binance wallet.
Take into account that your JoinCoin (JOIN) must be in your Spot Wallet in case you would want to purchase others, so you will need to move them there before.
That’s easy: just click on "Transfer to Spot Wallet" once the buying order has been completed.
If you forget to follow this step right after the purchase, no problem at all: you’ll always be able to do it later.
With these funds already in your Spot Wallet, don’t fear to buy any cryptocurrency you believe could be worthwhile.
Purchase any crypto from Binance just following the steps detailed next:
All right! Now you have funds available to trade any of the huge selection of JoinCoin (JOIN) in the Binance platform.
To purchase JoinCoin (JOIN) from Binance all you have to do is the following:
You’ve already learned how easy is to commence trading JoinCoin (JOIN) on Binance.
So, no need to think twice, make a worthwhile business in this crypto platform.
In case you want to earn money by buying cryptocurrencies, you would have to understand how to use the Kucoin platform. This form oftrade is delivering great benefits for all its subscribers, in fact it is showing a lot more progress in all its operations.
If you need to learn easily how to buy a JoinCoin (JOIN) in Kucoin, you need to read this post.
After you’ve created your account into the Kucoin platform and fulfilled the security requirements, you have to deposit your currency. Using this method is rather easy, good news is that there are several alternatives to do so.
One of them is to click to the "Assets" or "Balance" section at the top right in the navigator screen and choose the «Deposit» button. After that, pick the JoinCoin (JOIN) you want to put into your personal account to buy new cryptos, for example, USDT.
After this, you should pick the network you will use to get the transaction done. All of us recommend Tron (TRC20) because it has the lowest commissions.
Next you’ll see the address you must put in the «Exchange» where you have the USDT you wish to convert to Kucoin. When you have already done this, you can expect to obtain the funds in your main account immediately.
If that seems not to be not working in the country you’re living, you could attempt transferring the money to your account via P2P trading. This kind of purchase means that you make a traditional bank transfer to any of the documented traders to get any of the genuine cryptos.
When you obtained the money in your account, it’s the perfect time to learn how to work with the Kucoin website.
Before buying a JoinCoin (JOIN) on Kucoin you need to move the money you’ve just purchased to the trading accounts. To achieve this you must click on the «Balance» menu, click on the main account, enter your cryptocurrencies and after that choose «Transfer». This last option can be located on the same line than the currency you are about to use to complete the purchase.
If this does not work in the country you’re living, you should try transferring funds to your account through P2P trading. This kind of purchase implies that you actually make a traditional bank transfer to any of the documented traders to receive any of the official cryptos.
Once you received the funds in your account, it’s the perfect time to start interacting the Kucoin platform.
Before buying a JoinCoin (JOIN) on Kucoin you have to move the money you’ve just purchased to the trading account. To do this you have to click on the «Balance» menu, click on the main account, enter your cryptocurrencies and then choose «Transfer». This last button can be located on the same line as the currency you’ll use for the purchase.
Following this, you are directed to a window to pick where you are going to send the funds. You should take from the "Main Account" to the "Trading Account", and add the currency and the sum you want to send to operate. Then click «Confirm».
Now that you have the money already credited in your account, you can purchase your crypto and begin trading.
Next you will learn how to purchase JoinCoin (JOIN) in different ways. To begin, you must open up the «Trade» menu and pick «Spot trading» (Spot Market). Next enter the word JoinCoin (JOIN) in the search box at the top corner of the site.
The system will reveal the crypto pairs you are able to operate with.
In short, you‘ll only be in a position to buy JoinCoin (JOIN) just with the crypto pairs displayed there.
In this case, you can do it with «USDT», «USDC», «KCS», and «BTC».
We select ADA/USDT as we have funds in this couple. When we do that, it immediately loads the crypto graph data and the order book with all the buy and sell procedures.
For being able to do the operation, you will need to enter the trading key.
At the bottom on the right-hand area, the markets to trade crypto can be seen, automatically enabling «Spot». There you’ll find 3 ways to purchase JoinCoin (JOIN). Those are the following:
You can also set the order activation yet process it at the optimum market price. You will do this by selecting «Stop Market», and typing in "Stop Price" the value you want the JoinCoin (JOIN) to achieve to activate the order and the amount of USDT to spend. By clicking on Buy JoinCoin (JOIN), your buying order will be processed at the market rate once it is the identical to the stop price you’ve just determined.
With just one of these three options, you’ve already got the JoinCoin (JOIN) tokens you’ve just purchased available in your trading account. From now on you’re free to make transactions with that or you may want to get any other cryptos. Bear in mind that with JoinCoin (JOIN) you will only be able to get the cryptos available in their pairs. Probably you will need to trade your JoinCoin (JOIN) for a crypto that is usually available in the JoinCoin (JOIN) pairs, such as BTC, USDT, and BNB, and then you can buy the particular one that you actually want.
You can now start buying a JoinCoin (JOIN) using Kucoin.
| Exchange | Market Pairs | Buy |
|---|---|---|
| PancakeSwap (V2) | LTC/WBNB | - |