JDI Yield JDI Rank #6727
Projects
There are many trading platforms on the Internet nowadays, but certainly Binance is one of the most popular and reputed.
Therefore, the first thing you have to to do if you’d like to start out operating on it is to understand how to purchase JDI Yield (JDI).
Stay on this post and you will find everything you need to know about buying crypto on Binance.
Opening a Binance account is the very first step you must accomplish.
Registering to the Binance platform is quite simple: observe the following guidelines.
See a Binance main page and press on the "Register" key.
Go directly to Binance by pressing here.
Locate the "Register with a phone or email" button in the homepage and press it.
Apple tablets or mobile phones can be used as well.
Here you’ll will see the registration technique using an email address.
Binance will automatically send a one-time-only activation code (remember: this is NOT your password) that you’ll write it in the corresponding line, then press "Send"
And that’s it! You are now registered to Binance.
You can now access the Binance platform and observe all the options it offers.
This way you canit is possible to start operating with JDI Yield (JDI) conveniently.
Fulfill the mandatory ID checking to enable all these options.
Please, note that it is only after you have fulfilled this safety measure that you’ll get permission to start trading JDI Yield (JDI).
No big deal, though. See the next section to fulfill that step.
Read the following guidelines and become an authorized subscriber:
From the user profile menu, choose "Security"
You may also click on the "Verify" button at the top of the navigator window
Press "Identification" on the left menu.
Country of residence must be selected here.
Now, the 3 verification levels:
Begin by choosing "Start now" just near the "Verified" level.
Then a pop-up window will be shown and there you will need to provide the following data:
At this point, the Binance platform will ask you to provide a legal document for identity checking.
Use your passport, ID card or even your license to complete this step.
Follow the system guidelines to take a selfie.
The final step will be carried out by the Binance platform: a certification process that will take only a short time.
When your application has been approved, you will be informed via e-mail, just be patient.
After that, it’s time to get JDI Yield (JDI), just follow the guidelines below.
In this segment you’ll see how simple is to make a purchase of JDI Yield (JDI).
At this point, the Binance platform will ask you to present a legal document for identity verification.
Use your ID card, passport or even your license to complete this step.
Follow the system guidelines to take a selfie.
The final step is on Binance’s side: a certification process that will take only a short time.
All you have to do is be patient, Binance will send you an e-mail when your profile has been approved.
The following instructions will guide you through the JDI Yield (JDI) buying process. As soon as you’ve received the confirmation email, you are a Binance authorized JDI Yield (JDI) trader.
Understanding how to invest your money in JDI Yield (JDI) is actually quite easy.
Be aware that you may find different options for this process
Browse through the "Buy cryptos" menu on the Binance main page to find out which alternatives can be found when buying.
Needless to say you must login to your account to do this
Find all the different buying options just by hovering your mouse over this button.
Next, you’ll need to use a legal document to check your identity.
You can do this with your passport, ID card, or license.
Follow the system guidelines to take a selfie.
Once you have fulfilled the system’s instructions, you’ll have to wait a moment while your account is confirmed.
When your profile has been approved, you’ll be informed via e-mail, just be patient.
Congrats! As soon as you’ve received the confirmation you’re officially enabled to buy JDI Yield (JDI). See the guidelines that follow.
Understanding how to buy a JDI Yield (JDI) is actually quite easy.
You may have different options throughout the process
See the "Buy cryptos" menu on the Binance main page to know which options are available to you when buying.
You will need to, of course, try this once you are signed into your account
Move your mouse on this button and a list of buying alternatives will be shown.
The first thing you must do to buy the JDI Yield (JDI) of your preference using a credit card, is to choose this method from the "Buy Cryptos" drop-down menu.
Next, just stick to the following directions:
Currency preferred and how much to invest should be specified here.
Next, choose the JDI Yield (JDI) you are going to get
Depending on the amount of USD you have recently invested, the system will automatically display the quantity of JDI Yield (JDI) you’ll be given.
Continue reading for detailed guidelines:
Currency to be used and how much to invest should be stated in the next box.
Next, pick the JDI Yield (JDI) you are going to purchase
Once you do so, the platform will automatically show you the quantity of JDI Yield (JDI) you are going to get, taking into account the amount of USD you’ve recently invested.
Click "Continue".
If you want to pay with your credit card, select in the "Visa/Mastercard" field the option "Add card".
Indicate your CC details and click "Next".
Now write the physical address details for the card. Following this, select "Add card".
Now that your new card has been added, click on "Continue".
The next screen will display a quick view of the operation in its final stage. That includes the amount your card will be charged, the chosen currency and the quantity of JDI Yield (JDI) bought.
It will also show you the commission you need to pay for the purchase.
Now you must certify the order pressing the "Confirm" button within the following minute, or it will be automatically shut down.
After this, you will be sent towards the site of the bank issuing the credit card. There you should complete a standard online payment using your credit card.
Your recently purchased JDI Yield (JDI) will be credited to your Binance e-wallet (called the «Spot Wallet») when the banking procedure has been completed
The system will now show you the summary of the purchase order you are about to complete. The sum your card will be charged with the currency you have picked, and the JDI Yield (JDI) you will get.
It will also indicate the commission you will have to pay for the transaction.
Within the next 60 seconds click on "Confirm", from then on the order will expire automatically.
The system will now redirect you to the credit card issuing bank. Follow the instructions in the same way you would make a payment with your credit card.
After the banking process is complete, you are already in possession of the recently bought JDI Yield (JDI) in your Binance e-wallet (referred to as the «Spot Wallet»)
After the new payment method has been configured in your account, look for the "Buy Crypto" menu in the top bar of the navigator, click the "Trading P2P" button and follow the steps described below:
Once you have completed a payment to the trader, they are going to release the JDI Yield (JDI), by confirming invoice of the payment.
You may verify your wallet Binance balance to confirm reception.
NB: you need to transfer them to your Spot Wallet in case you want to get any other crypto.
To accomplish this, you only need to click on "Transfer to Spot Wallet" right after the buying order is completed.
This JDI Yield (JDI) internal transfer can be done anytime later.
Once you have made a payment to the seller, they may release the JDI Yield (JDI), just by confirming payment reception.
You may check your wallet Binance balance to confirm reception.
NB: you will have to move them to your Spot Wallet in order for you to get any other cryptocurrency.
To accomplish this, all you have to do is click on "Transfer to Spot Wallet" once the purchase order has been completed.
If you didn’t follow this step, don’t be anxious, you can do it later.
That’s all! Now you will have funds in the Spot Wallet so you will be able to buy any of the numerous JDI Yield (JDI) that the Binance platform has.
To buy JDI Yield (JDI) from the Binance platform all you have to do is the following:
With these funds already in your Spot Wallet, nothing keeps you from trading any crypto you believe could be profitable.
To purchase JDI Yield (JDI) from Binance all you have to do is described below:
You’ve already seen how easy is to start out doing business with JDI Yield (JDI) on Binance.
So, no time to waste, make a fruitful business within the Binance platform.
In case you wish to earn money via cryptocurrencies, you must learn how to utilize the Kucoin platform. This form oftrade is providing strong benefits to any or all its users, and it is making a lot more progress in all its operations.
If you want to learn conveniently how to buy a JDI Yield (JDI) in Kucoin, you need to keep on reading this article.
After you have created your account into the Kucoin platform and complied the safety requirements, you need to deposit your currency. This procedure is quite simple, the best part is that there are several ways to accomplish that.
One of them should be to enter to the "Balance" or "Assets" section at the top right in the navigator screen and select the «Deposit» link. From then on, pick the JDI Yield (JDI) you would like to put into your personal account to purchase new cryptos, for instance, USDT.
Following this, you will need to find the network you will use for the operation. All of us recommend Tron (TRC20) because it retains the lowest commissions.
Below is the the address you must put in the "Exchange" where you have the USDT you’d like to transfer to Kucoin. When you have already done this, you’ll instantly get the funds in your main account.
If that does not work in the country you’re currently living, you may try transferring funds to your account through P2P trading. This kind of deal signifies that you actually make a bank transfer to one of the listed traders to receive any of the authorized cryptos.
When you obtained the money in your account, it’s time for you to learn how to use the Kucoin platform.
Before buying a JDI Yield (JDI) on Kucoin you need to transfer the money you’ve just purchased to the trading accounts. To do this you must navigate to the "Balance" menu, click on the main account, enter your cryptocurrencies and after that choose «Transfer». This last button can be located on the same line as the currency you are about to use for the purchase.
If this is not working in the country you’re currently living, you could try transferring funds to your account through P2P trading. This kind of transaction signifies that you actually make a standard bank transfer to one of the documented traders to obtain any of the approved cryptos.
Now that you have the money in your account, it’s the perfect time to start navigating the Kucoin website.
Purchasing a JDI Yield (JDI) on Kucoin you need to transfer the money you’ve just purchased to the trading accounts. To accomplish this you have to open the «Balance» menu, click the main account, enter the cryptocurrencies after which choose "Transfer". This last option can be situated on the same line as the currency you are going to use for the purchase.
Following this, you will be sent to a window to pick where you are going to send the funds. You will need to take from the "Main Account" to the «Trading Account», and indicate the currency and the quantity you decided to send to trade. Then click on "Confirm".
Once you got the cash already credited in your account, you can purchase your crypto and begin trading.
Next we will discuss how to buy JDI Yield (JDI) in different ways. To start, you should go to the «Trade» menu and click on «Spot trading» (Spot Market). Then just enter the term JDI Yield (JDI) in the search line at the top corner of the site.
The system will show you the crypto pairs you are able to operate with.
In other words, you will only be capable of buy JDI Yield (JDI) just with the crypto pairs displayed there.
In this case, you can do it with «USDT», «USDC», «KCS», and «BTC».
We choose ADA/USDT because we’ve got funds in this pair. When we do so, it instantly loads the crypto information and the order book containing the buy and sell businesses.
In order to be able to make the transaction, it is necessary to enter the corresponding code.
At the bottom on the right-hand area, the platform displays the user the financial markets to trade crypto, instantly enabling the «Spot». There we now have 3 ways to buy JDI Yield (JDI). The options are as follows:
You can also configure the order activation and process it at the greatest market price. You can do this by choosing "Stop Market", and writing in «Stop Price» the sum you prefer the JDI Yield (JDI) to arrive to trigger the order and the amount of USDT to invest. By simply clicking Buy JDI Yield (JDI), your buying order will be executed at the market rate when it is the identical to the stop price you have previously set.
With just one of these three options, you’ve already got the JDI Yield (JDI) tokens you have purchased available in your trading account. From this moment you are able to trade with this or you can purchase other cryptos. Bear in mind that with JDI Yield (JDI) you will only be capable of get the cryptos available in their pairs. Usually, you will have to sell the JDI Yield (JDI) for a crypto that commonly appears in the JDI Yield (JDI) pairs, such as BTC, USDT, and BNB, after which you could purchase the one that you really expect.
Now you can start trading a JDI Yield (JDI) using Kucoin.
| Exchange | Market Pairs | Buy |
|---|---|---|
| ApeSwap (BSC) | ETC/WBNB | - |
| LATOKEN | GLC/USDT | - |