No doubt one of the most reputed trading platforms in the world today is Binance.
Understanding how to buy Edgeware (EDG) is vital if you wish to get started on trading on that platform.
Prior to stepping into the exciting world of cryptocurrency within the Binance platform, you will have to get acquainted with the following.
There is only way to begin operating on Binance: opening an account in it.
No complicated subscription: just follow the guidelines listed below.
On the Binance homepage you have to locate the "Register" option and click on it.
Here you have the direct access to Binance.
Once on the Binance platform press the "Register with a phone or email" button.
You can also do this using your iOS device.
In this article, we’ll will explain how to suscribe with an email.
See the inbox of the email address you utilized for sign up and search the activation code for your account. Type it in the corresponding box and click on "Send"
You’re now a Binance subscriber!.
Now you may enter the Binance platform and observe all the options it has to offer.
This way you canyou will be able to start trading Edgeware (EDG) very easily.
The identity checking is a required step you must complete to gain access to all those options.
Please, be well aware that it will be only after you have fulfilled this safety measure that you’ll be authorized to begin operating with Edgeware (EDG).
But no need to worry, continue reading the next instructions to learn how to do it.
These are the steps to verify your Binance account and get authorized to begin operating:
Select "Security" from the drop-down list under the user profile section
Or just look for the "Verify" button on the upper part of the screen
Pick "Identification" on the left options list.
Country of residence is the first thing you must pick.
Next you’ll will see three verification levels:
To begin, press "Start now" just below the "Verified" level.
Then a pop-up window will be shown and there you will need to enter the following info:
The next step is to sustain your identity using a legal document.
You can do this with your ID card, passport, or license.
Now, you will be asked to take a selfie, following the platform’s guidance.
Once those requisites have been completed, the Binance platform will execute a confirmation process on your account.
Now be patient, Binance will send you an email as soon as your application has been approved.
The following instructions will guide you through the Edgeware (EDG) buying process. As soon as you’ve received the confirmation email, you have become a Binance authorized Edgeware (EDG) trader.
Take a time to know how to invest your money in Edgeware (EDG).
It is time to sustain your identity with a legal document.
ID card, passport or even a driver’s license will be enough to complete this formality.
Follow the system guidelines to take a selfie.
The last step is on Binance’s side: a corroboration process that will take only a short time.
As soon as your profile has been approved, the platform will let you know via email, just be patient.
The following instructions will guide you through the Edgeware (EDG) buying process. As soon as you’ve got the confirmation email, you have become a Binance licensed Edgeware (EDG) trader.
In this segment you’ll realize how simple is to invest your money in Edgeware (EDG).
Take into account that you may have different alternatives for this process
To find out which alternatives you have when making a purchase, browse through the "Buy cryptos" menu on the Binance main page.
Needless to say you must login to your account to do this
Hovering your mouse pointer over this key will display a list of alternatives for making your purchase.
It is time to verify your identity with a legal document.
passport, ID card or even a license are all valid documents to complete this condition.
Now, you will be asked to take a selfie, following the platform’s guidance.
Once those steps have been completed, the Binance system will carry out a confirmation process on your account.
So, be patient, Binance will send you an e-mail when your application has been accepted.
The following instructions will guide you through the Edgeware (EDG) trading process. As soon as you’ve received the confirmation email, you’ve become a Binance authorized Edgeware (EDG) trader.
Learning how to buy a Edgeware (EDG) is actually quite easy.
Some processes may have optional paths
The "Buy cryptos" menu on the Binance main page will be your reference when making a purchase.
You must, of course, try this once you are signed into your account
Hover your mouse on this button and a list of buying alternatives will be shown.
What you will do to purchase the Edgeware (EDG) of your choice using a credit card, is to pick this option from the drop-down menu labeled "Buy Cryptos".
Read on for detailed guidelines:
Currency preferred and how much you will invest should be defined here.
The the Edgeware (EDG) you wish to buy should be selected from the second field
Once you do so, the platform will immediately display the quantity of Edgeware (EDG) you’ll be given, considering the amount of USD you have recently specified.
Keep on reading for further directions:
Currency preferred and how much to invest must be defined here.
Next, select the Edgeware (EDG) you’re going to purchase
The quantity of Edgeware (EDG) you are going to be given will depend upon the amount of USD you’ve previously specified. The Binance platform will immediately show it to you.
Press "Continue".
Now you must specify the method of payment you’ll use. To pay with your credit card, choose in the "Visa/Mastercard" field the option "Add card".
Then the platform will ask you to enter your CC numbers.
Now indicate the physical address details of the card. Following this, select "Add card".
When you see your new card has been added, click on "Continue".
Next, all the relevant details of the transaction will be displayed: the amount you’ll pay and the corresponding currency, and of course, the cryptos you will get.
Another important detail in this snapshot is the amount Binance will charge you as a commision for making the transaction.
In less than 1 minute press "Confirm", after that time the order will expire automatically.
The following step must be done on the credit card banking system. Proceed exactly as you usually do when making a normal online credit card payment.
After the banking process has been completed, you are already in possession of the recently purchased Edgeware (EDG) in your Binance e-wallet (called the «Spot Wallet»)
Next, you’ll see a quick view of the transaction in its final stage. That includes the amount your card will be charged, the selected currency and the amount of Edgeware (EDG) bought.
In fact, Binance will charge you a certain percentage as a commission for making the transaction, and that will appear in that overview also.
In less than 1 minute click on "Confirm", from then on the order will expire automatically.
The Binance platform will now redirect you to the bank issuing the credit card. Follow the directions in the same way you would normally generate a payment with your credit card.
Once the banking procedure is complete, you are already in possession of the purchased Edgeware (EDG) in your Binance digital wallet (referred to as the «Spot Wallet»)
Now that the new payment method has been configured in your profile, go to the upper part of the screen and pass over "Buy Crypto" to drop-down the menu and choose "Trading P2P". Then see the following instructions:
Cryptocurrencies will be released by the seller as soon as payment reception acknowledge has been done.
You may see your wallet Binance balance to confirm reception.
Take into account that your Edgeware (EDG) must be in your Spot Wallet in case you would want to purchase others, so you must send them there before.
That’s quite simple: just click on "Transfer to Spot Wallet" once the buying order is completed.
If you didn’t do this, don’t be anxious, you can move the cryptos later.
Cryptos will be released by the trader as soon as money reception validation has been done.
The default place where Edgeware (EDG) are deposited is your Binance wallet.
Although, in case you want to buy another Edgeware (EDG), you need to transfer them to your Spot Wallet.
You can do this immediately immediately after the buying order has been completed just by clicking "Transfer to Spot Wallet".
This Edgeware (EDG) internal movement can be performed anytime later.
That’s all! Now you will have money in the Spot Wallet and you will be able to purchase any of the numerous Edgeware (EDG) within the Binance platform.
To buy Edgeware (EDG) from Binance what you just have to do is the following:
That’s all! Now you will have money in the Spot Wallet so you will be able to buy any of the huge selection of Edgeware (EDG) that the Binance platform has.
To purchase Edgeware (EDG) from the Binance platform what you just have to do is described below:
Depending on the information above, you are now ready to start out trading on the Binance platform.
Don’t wait any further and begin generating an extra income.
In case you like to earn money by purchasing cryptocurrencies, you should learn how to utilize Kucoin platform. This exchange is bringing strong benefits to all its subscribers, and it is showing more and more progress in all its operations.
If you would like to learn conveniently how to buy a Edgeware (EDG) in Kucoin, you must stay in this article.
When you’ve created your account into the Kucoin platform and fulfilled the security requirements, you must deposit your cash. This procedure is very easy, and you have several alternatives to accomplish that.
One of them is usually to go to the «Assets» or «Balance» section at the top right on the navigator screen and choose the "Deposit" link. There after, select the Edgeware (EDG) you want to put into your personal account to buy new cryptos, for instance, USDT.
After that, you will have to select the network you will use for the transaction. We usually recommend Tron (TRC20) because it requires the lowest commissions.
Next is the the address you should put in the "Exchange" where you have the USDT you wish to convert to Kucoin. When you have already done this, you’ll instantly receive the funds in the main account.
If this is not working in your country, you could attempt transferring the money to your account through P2P trading. This type of deal signifies that you make a standard bank transfer to any of the registered traders to receive any of the approved cryptos.
Once you received the funds in your account, it’s the perfect time to learn how to interact with the Kucoin platform.
Purchasing a Edgeware (EDG) on Kucoin you need to transfer the money you’ve just purchased to the trading accounts. To accomplish this you have to click on the "Balance" menu, click the main account, enter your cryptocurrencies then choose "Transfer". This last option can be located on the same line as the currency you are about to use for the purchase.
If that doesn’t work in your country, you can try moving funds to your account via P2P trading. This kind of deal implies that you actually make a conventional bank transfer to any of the documented traders to receive any of the official cryptos.
Once you get the money in your account, it’s time for you to learn how to navigate through the Kucoin platform.
Before buying a Edgeware (EDG) on Kucoin you have to transfer the money you’ve just purchased to the trading account. To accomplish this you need to navigate to the "Balance" menu, click on the main account, enter your cryptocurrencies then choose «Transfer». This last option can be located on the same line than the currency you’ll use to complete the purchase.
After this, you will be sent to a window to pick where you wish to send the funds. You need to transfer from the «Main Account» to the "Trading Account", and indicate the currency and the amount you want to send to transact. Then click on "Confirm".
Now that you got the money in the account, you are able to purchase your crypto and begin trading.
Here we will explain how to purchase Edgeware (EDG) in diverse methods. To begin, you should open up the «Trade» menu and pick "Spot trading" (Spot Market). Then just type the word Edgeware (EDG) in the search box in the top corner of the page.
The system will highlight the crypto pairs you can operate with.
In other words, you‘ll only be in a position to purchase Edgeware (EDG) only with the crypto pairs showed there.
In this case, you can do it with «USDT», «USDC», «KCS», and «BTC».
We select ADA/USDT since we’ve got funds in this two. When we do so, it quickly loads the crypto information and the order book with the buy and sell procedures.
For being able to make the transaction, it is necessary to enter the corresponding password.
At the bottom-right, it displays the user the markets to trade crypto, enabling automatically the «Spot». There we now have 3 options to purchase Edgeware (EDG). Those are the following:
You can also set the order activation but process it at the optimum market price. You do this by going to «Stop Market», and indicating in «Stop Price» the value you wish the Edgeware (EDG) to reach to trigger the order and the amount of USDT to spend. By hitting Buy Edgeware (EDG), your order will be executed at the market rate when it is the identical to the stop price you have set.
With any of these options, you’ve already got the Edgeware (EDG) tokens you have bought available in your trading account. From this moment you can trade with that or you may want to purchase any other cryptos. Bear in mind that with Edgeware (EDG) you will only be authorized to get the cryptos available in their pairs. Generally you will need to sell your Edgeware (EDG) for a crypto that is commonly available in the Edgeware (EDG) pairs, such as BTC, USDT, and BNB, and then you could purchase the particular one that you actually want.
Now you can start trading a Edgeware (EDG) via Kucoin.
